LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old April 2nd 05, 02:02 AM
Hal Rosser
 
Posts: n/a
Default Velocity Factor GT unity

Now, with all this talk about velocity factors and the calculation thereof,
one should consider the possibilities of and consequences resulting
therefrom of velocity facors in the range of positive numbers greater than
one.
With these velocity factors, some hams would be able to hear some signals
even before they were transmitted, giving him the time to adjust his rotor,
his antenna tuner, and his hearing before the signal arrives.
If the signal leaves the antenna before its transmitted, then the concern
over impedence matching would be for naught.


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Velocity factor of an insulated antenna wire. Reg Edwards Antenna 6 April 1st 05 11:42 PM
Unity Gain? Dan Richardson Antenna 8 June 26th 04 09:15 PM
End effect, velocity propagation question Tac Antenna 3 May 25th 04 10:00 PM
Measuring Velocity Factor w/ MFJ-259 Jason Dugas Equipment 0 October 30th 03 04:38 AM
Shielded Loop - Velocity Factor? Loopfan Antenna 4 July 16th 03 07:33 AM


All times are GMT +1. The time now is 12:42 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017