Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 14th 05, 04:35 PM
Wes Stewart
 
Posts: n/a
Default

On Thu, 14 Apr 2005 10:59:19 GMT, Dennis Kaylor
wrote:

for what bands dave?
for HF RG213 would do you nicely
but if your doing VHF/UHF you really need a good coax like 9913F or
LMR400 they have a buryflex just dont recall the model number
keep in mind at VHF freqs 100 or more you really start to lose a lot of
RF with cheap coax
RG213 at 400mhz @100ft is more than 9db of loss which is a lot
good luck


Better check your numbers again. RG213 is more like 4.7 dB/100'
@400MHz
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
A Coax experiment [email protected] Shortwave 6 March 22nd 05 12:23 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Shortwave 23 November 3rd 04 01:38 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM


All times are GMT +1. The time now is 05:07 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017