On Sat, 04 Jun 2005 21:49:25 -0500, Cecil Moore
wrote:

Bob Miller wrote:
"Connect any antenna with single wire feed to connection marked Random
Wire. Connect balanced line to connection marked Balanced Line with
Jumper as indicated on back panel." (and there's a painted line
between the Balanced Line connectors.)

If it's helpful, there are pictures, inside & out, of the Murch tuner at
http://cgi.ebay.com/ws/eBayISAPI.dll...m=5757714 402

I suspect the jumper wire needs to go between the random wire
terminal and one of the balanced line terminals. That's the
way it is on my MFJ. On the inside, do the balanced line
terminals go anywhere besides the balun?

One Balanced Line terminal goes to a balun winding wire. The second
Balanced Line terminal goes to another balun winding wire; the second
terminal also has a wire going to the Antenna Selector Switch, which
selects the balanced antenna. The Random Wire terminal has a wire
going to the same Antenna Selector Switch, which also selects the
random wire antenna.

Those are the only wires on these three terminals.

bob
k5qwg