Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old June 6th 05, 10:29 PM
Hal Rosser
 
Posts: n/a
Default

Allodoxaphobia,
you must be talking about a tv 'splitter', rather than the balun
(remember, the balun has a 300-ohm cable on one end and a place to screw
coax on the other side.)
it wouldn't (normally) have 3db loss like a splitter would.


"Allodoxaphobia" wrote in message
...
On Mon, 06 Jun 2005 07:31:32 -0400, J. B. Wood wrote:
In article jzuoe.940$KQ2.679@trnddc08, "puns"

wrote:

Are those small 300/75 ohm tv baluns. voltage or current type?


Hello, and these broadband 4:1 (impedance ratio) baluns most often are
voltage type using two transformers. ... ... ...


Only the 'quality' ones. I've seen too many that were simply
resistor bridges. More like a 6dB insertion loss per leg than
the 'ideal' 3dB loss in a quality transformer-built version.

Jonesy
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK



  #2   Report Post  
Old June 7th 05, 12:01 AM
Allodoxaphobia
 
Posts: n/a
Default

On Mon, 6 Jun 2005 17:29:06 -0400, Hal Rosser wrote:

"Allodoxaphobia" wrote in message
...
On Mon, 06 Jun 2005 07:31:32 -0400, J. B. Wood wrote:
In article jzuoe.940$KQ2.679@trnddc08, "puns"

wrote:

Are those small 300/75 ohm tv baluns. voltage or current type?

Hello, and these broadband 4:1 (impedance ratio) baluns most often are
voltage type using two transformers. ... ... ...


Only the 'quality' ones. I've seen too many that were simply
resistor bridges. More like a 6dB insertion loss per leg than
the 'ideal' 3dB loss in a quality transformer-built version.


Allodoxaphobia,
you must be talking about a tv 'splitter', rather than the balun
(remember, the balun has a 300-ohm cable on one end and a place to screw
coax on the other side.)
it wouldn't (normally) have 3db loss like a splitter would.


Yep. You are correct -- I was misreading what my eyes were taking in.
Tho' it would not surprise me to see some cheap 'balun' consisting
of 100ohm-75ohm-100ohm in series with the coax tacked across the
75ohm resistor....

Jonesy -- who needs more skills in Reading-For-Comprehension...
--
| Marvin L Jones | jonz | W3DHJ | linux
| Gunnison, Colorado | @ | Jonesy | OS/2 __
| 7,703' -- 2,345m | config.com | DM68mn SK
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Inverted ground plane antenna: compared with normal GP and low dipole. Serge Stroobandt, ON4BAA Antenna 8 February 24th 11 10:22 PM
significance of feedline orientation Brian Shortwave 6 October 22nd 04 01:43 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM
Antenna Questions ASW Shortwave 26 December 8th 03 04:30 AM
QST Article: An Easy to Build, Dual-Band Collinear Antenna Serge Stroobandt, ON4BAA Antenna 12 October 16th 03 07:44 PM


All times are GMT +1. The time now is 01:03 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017