Hi every one
I have just bought a GAP voyager DX antenna which I have just put up.
At the moment I am rather disapointed, due to really high SWR on all
bands (160m, 80m, 40m and 20m). I am wondering if some one have a
schematic on this antenna, so I could do some inital measurements
between the terminals on the coax and to the different aluminum pipes
to see if something is wrong there. I forgot to make some drawings on
how things was actually connected especially for the top part with the
capacitor and the coaxial feed, and also how the thin loading pipes on
the sides are connected. This antenna is a real beast to put up and
probaply the same to take down so I do not look forward to try to take
it down to find the fault.

Best regards Assar W. SM2LTA