LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Old June 22nd 05, 05:29 AM
Reg Edwards
 
Posts: n/a
Default


"Fred W4JLE" wrote
Reg;
How many radials are required in GB for a commercial broadcast

station ?


====================================
Fred,
Depends on how long and thick they are. But in general, just
sufficient to meet overall technical and economic requirements with
one or two more for luck.

Design engineers, just to be awkward, are inclined to deliberately
avoid 120. Then they can sit back and have a good laugh when it still
works.
----
Reg, G4FGQ


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
What tool to measure SWR at 910 Mhz? [email protected] Antenna 14 May 10th 05 06:40 PM
Can you measure and post your DTMF Twist? Rick General 0 April 4th 05 06:57 AM
Measure Z with Vector Voltmeter properly The other John Smith Antenna 18 May 3rd 04 05:09 PM
Ground rods in rocky soil Northern Lights Antenna 15 November 22nd 03 08:14 AM
SWR will change with Source Z if you measure AT the Source Tarmo Tammaru Antenna 18 August 30th 03 03:18 AM


All times are GMT +1. The time now is 11:09 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017