Home |
Search |
Today's Posts |
#30
![]() |
|||
|
|||
![]() "Walter Maxwell" wrote Reg asked if I could send my data as an email, so I converted the file to text format to be able to present the data in full here in this msg. I checked to see that the tabular format remained intact, and it did in Outlook Express, so here it is. I hope the tabular format will remain intact in your browsers. Be sure to give your screen maximum width. If it doesn't, let me know and I'll resend in PDF format. Walt, W2DU Dipole Terminal Impedance Data Obtained From Measurements at Various Heights Above Ground in the Frequency Range from 14.0 to 15.0 MHz. Measurements Made be W2DU at the W2DU site in DeLand, Florida. ============================================ Data received as an extension to this message. Fills screen very nicely. Thank you very much Walter for your trouble. ---- Reg, G4FGQ =========================================== |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
What tool to measure SWR at 910 Mhz? | Antenna | |||
Can you measure and post your DTMF Twist? | General | |||
Measure Z with Vector Voltmeter properly | Antenna | |||
Ground rods in rocky soil | Antenna | |||
SWR will change with Source Z if you measure AT the Source | Antenna |