Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
We have to get over the notion that calling some part of the antenna
structure "ground" gives it some kind of special properties. It doesn't. Never said it did. But I still consider it a ground plane... :/ Or at least more of a ground plane, than a straight 1/2 wave. Note the "VHFGP" in eznec, or elnec. It's noted as a "ground plane" and is almost exactly the same antenna as WWV's versions. Same 45 degree slope with the radials. I do agree about the rest though. BTW, when comparing a model of a "flat radial" GP, and one with sloped radials, there looks to be an increase of current from the radials, but it's not huge. I think you need to get a pretty steep angle going for the cancellation effects to really disappear. In comparing the two on 10m, at 40 ft at the base, the difference in gain between the two is very small. About a 1/10 a db or so... Where I show the straight 1/2 wave to be appx .6 to .7 db better than the 1/4 GP's. Sloped radials, or straight. Tends to make me think the 45 degree sloped version still acts a bit more like a usual flat GP, than the straight 1/2 wave. I think if you get to 20 degrees or less, then yes, it starts thinking it's more a straight vertical. Of course, in the real world you would probably be hard pressed to tell a difference between any of them. MK |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
helicity on vertical dipoles | Antenna | |||
1/4 wave vertical vs. loaded vertical | Antenna | |||
Photos wanted for ARES/RACES Article! | Equipment | |||
Why I Like The ARRL | Policy | |||
LQQKing for Construction Article | Antenna |