LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old August 19th 05, 01:24 PM
Giovanni
 
Posts: n/a
Default Using 450ohm ladder line

I have the possibility to run a 450hom ladder line from the rooftop
down to the shack in the basement of the house, through an unused
chimney made of a steel pipe of about 1 foot of diameter and about 20
feet long. If the multiband dipole antenna to be feeded is balanced,
the feed line should not radiate so it should not matter if it is
shielded.
A balanced antenna tuner in the shack should take care of any impedence
variation of the ladder line.

Advice on this implementation will be very much appreciated.

Many thanks,
Giovanni IW0BJR

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Feed Line Length - Ladder Line Pat Whelton Antenna 10 July 7th 05 12:54 AM
How to measure soil constants at HF Reg Edwards Antenna 104 June 25th 05 10:46 PM
450ohm Ladder Line Dimension and PVC Jim Miller Antenna 3 March 3rd 05 12:07 AM
FCC: Broadband Power Line Systems Paul Policy 0 January 10th 05 05:41 PM
Ladder Line question please? exray Boatanchors 0 April 23rd 04 11:39 PM


All times are GMT +1. The time now is 01:37 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017