Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
dansawyeror wrote:
My first claim is a tuner at the source does not materially improve what is happening in the coax. That is a tuner does not recreate the condition above where the coax is functioning as a properly matched and terminated transmission line. All the tuner does is match the impedance at the coax source back to some known, usually 50 Ohm, value. No matter what the voltages and currents are, if they are balanced, the transmission line won't radiate (much). If the SWR is 100:1 and the currents are balanced, the transmission won't radiate (much). If the SWR is 1:1 and the currents are unbalanced, the feedline is likely to radiate. My second claim is when the mismatch condition at the coax destination, i.e. antenna that may result in significant radiation from the coax itself. Please understand it is not impedance mismatches that cause radiation from the feedline. It is unbalance in the feedline currents that causes feedline radiation. Current imbalance and impedance mismatches are not necessarily related. Current imbalance in a matched system can cause feedline radiation. Impedance mismatches can exist with negligible feedline radiation. -- 73, Cecil http://www.qsl.net/w5dxp ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
160 thru 20 meter homebrew vertical system | Antenna | |||
10, 6 & 2 Meter Vertical | Antenna | |||
Advice good 80 meter vertical | Antenna | |||
Conix 160 Meter Vertical --CQ | Antenna | |||
Smith Chart Quiz | Antenna |