Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need help to optmise a older Hy-Gain antenna for 2M SSB
PLEASE, I need help.
If anyone can run the numbers, I have tried Quick Yagi with little success. I have a pair of the OLDER Hy-Gain 2m antenna's. There design was a 200ohm (I think) Hairpin match (to 50ohm) with the reflector and directors INSULATED from the boom. Current model for the last 10+ years is the elements are not insulated from the boom. I want to respace the elements, possilbing cutting down as it is easier than lenghting them, to get the best 1. Beamwith/pattern 2. FB 3. Gain. I am only going to use them on 2M SSB with a center freq of 144.250 Here are the measurments. 14' boom El Lgth Space D6 34.62500 32.25 D5 35.00000 26.75 D4 35.12500 25.75 D3 35.12500 28.25 D2 35.25000 22.25 D1 35.50000 12.75 Driven 32.75000 16.75 Ref 44.37500 1.75 Notes. Measured in Inches. Reflector is mounted 1.75 inch from end of boom, D6 is 1.5 inch from end of boom. All Elements are INSULATED on top of the boom. If needbe I can remove 1 director as the insulator need replacing. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Antenna Advice | Shortwave | |||
LongWire Antenna | Shortwave | |||
X-terminator antenna | CB | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Ten-tec vee beam | Antenna |