| Home |
| Search |
| Today's Posts |
|
#2
|
|||
|
|||
|
wrote in message oups.com... I am looking to set up a laptop on a boat that will receive wifi signals. I need to install a twenty foot cable from the antenna to a Proxim orinoco 8011b/g gold wireless card. I have found the cable but don't know what antenna to attach to it as I want to minimize loss of signal and I believe I have to get a certain length antenna to synchronize with the cable length to do this. Does anyone know what the right size antenna should be? Also, any suggestions on where to pick one up? I found the cable here http://sharperconcepts.zoovy.com/pro...C-CA-RSPNMAXXX Hi Petercc I have some interest in a similar project with WiFi. Forgive me if I'm not understanding what you want to do. Are you sure that card will fit in your lap top? All the lap top PCMCIA WiFi cards I've seen, that have a coax connector, use a much smaller connector. You didnt indicate if you know from which direction the WiFi signal is coming from. does the marine antenna need to be omniazimuth? Are you willing to accept the signal loss associated with the 20 feet of coax? My weather conditions are not as extreme as your marine environment. I have installed a wireless Ethernet bridge at the antenna and connected that to the computer with CAT 5 to alleviate the line loss problem at 2.4 GHz. E-mail me if you want any info and/or pictures of what I'm messing with. Jerry |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Discone antenna plans | Antenna | |||
| Is it a CB or VHF marine antenna? | Antenna | |||
| Understanding Shortwave Radio Listening and Antenna Design and Construction | Shortwave | |||
| EH Antenna Revisited | Antenna | |||
| Outdoor Antenna and lack of intermod | Scanner | |||