| Home |
| Search |
| Today's Posts |
|
|
|
#1
|
|||
|
|||
|
wrote in message oups.com... Yes I would like an email address so I can see what you are talking about. I have the cable connector which connects to the main cable from the proxim card fine. I am picking up the 20 foot cable and want an antenna that will minimize loss of the signal. I tried an existing omni antenna that is aboout 30" long and a long cable and the signal was nonexistant. With the short cable and that same antenna I was using, I got some hotspots tuned in. Hi Peter I sent you an E-mail. Let me know here if it doesnt get to you. Do you have any specs on the "existing antenna"? I havent seen any omniazimuth WiFi antennas that long. It is likely that the 30 inch long antenna is *not* designed for 2.4 GHz use. Try to get some specs on the loss of the cable you are "picking up". Since I am not willing to accept the loss associated with coax at this frequency, I have resorted to either USB or CAT 5 rather than use coax from the antenna to the computer. Jerry |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Discone antenna plans | Antenna | |||
| Is it a CB or VHF marine antenna? | Antenna | |||
| Understanding Shortwave Radio Listening and Antenna Design and Construction | Shortwave | |||
| EH Antenna Revisited | Antenna | |||
| Outdoor Antenna and lack of intermod | Scanner | |||