Home |
Search |
Today's Posts |
#14
![]() |
|||
|
|||
![]()
On Sun, 09 Oct 2005 03:39:32 GMT, "Frank"
wrote: Axial extension 1.2" from antenna end -- Results as follows: Extension Length (ft) Resonant Freq. (MHz) 0 3.5765 5 3.576 10 3.575 20 3.574 50 3.5725 100 3.5720 For a total shift of 4.5 kHz (0.125%) from zero to 100 ft Hi Frank, Thanx. Was this for a coaxial line running from the drivepoint, then parallel to the lower leg, down? Was the parallel separation 1.2" as you describe above? Was this line modeled as a third wire connected at the drivepoint and dropping as I describe? 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Anyone have an EZNEC Windom Model | Antenna | |||
Super Antennas MP-1 EZNEC model | Antenna | |||
EZNEC Model of 88ft doublet | Antenna | |||
EZNEC Model of a Terminated Vee-Beam | Antenna | |||
EZNEC v. 4.0 at Dayton | Antenna |