Owen Duffy wrote:
In the case of the Bird 43, I suggest that if had, say, at 1MHz, 75
ohm line and a 75 ohm load on the load side, that the V/I raio for the
travelling waves in the region of the sampling element would be so
close to 50 ohms as to not materially affect the accuracy of
measurements on the 50 ohms coupler section, irrespective of the fact
that the sampling element has only 0.02% of a wavelength of 50 ohm
line on its load side.

If there is 75 ohm coax on the input of the Bird, the reflected
power reported by the Bird on the coax will be off by an infinite
percent. That's pretty inaccurate.
--
73, Cecil http://www.qsl.net/w5dxp