Home |
Search |
Today's Posts |
#22
|
|||
|
|||
"Cecil Moore" wrote in message ... Reg Edwards wrote: So we need something different from and more sophisticated than the conventional automatic tuner with its relatively simple magnitude and phase-searching abilities. If you remembered what frequency the mag loop had been tuned to last time, would that alleviate the need to know phase? The reason I ask is that is how I auto-tune my screwdriver without knowing phase. -- 73, Cecil http://www.qsl.net/w5dxp ======================================== Cecil, while you are tuning your screwdriver, which is not a magloop, phase and magnitude does not enter your head. Forget all about it! --- Reg |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
SkyWire Loop Antenna [Was: Wire loop.] Question | Shortwave | |||
Eznec magnetic loop | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Magnetic Loop antennas for LF and MF reception | Shortwave |