Home |
Search |
Today's Posts |
#8
![]() |
|||
|
|||
![]()
Steve - www.ukspeedtraps.co.uk wrote:
Thanks for that, so a 1/4 wave does not need a counterpoise then? Strip 1/4WL of insulation from the coax. Fold the outside braid back along the coax. That will leave you 1/4WL of center conductor exposed (you can leave the center insulation in place) and the braid will provide the other half of the antenna which should be insulated to avoid backpacking RF burns. Kraus calls such a "vertical 1/2WL sleeve antenna. On edge it looks like: -------------------+ -------------------------------+ 1/4WL ================================================== == -------------------------------+ -------------------+ 1/4WL -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Discone antenna plans | Antenna | |||
Yaesu FT-857D questions | Equipment | |||
EH Antenna Revisited | Antenna | |||
Outdoor Antenna and lack of intermod | Scanner |