Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
jmorash wrote:
Thanks Roy! I think I understand baluns quite a bit better now. Seems like, indeed, a couple ferrite beads could make quite a difference to my radiation pattern. This question is for Roy or anyone else who might know the answer: what tool(s) do I want to try and gauge how good of an antenna I've built? An SWR meter? Do they make those for 900 MHz? What else? An SWR meter doesn't measure antenna goodness. The only thing it tells you is how close the antenna's impedance is to 50 ohms, which has nothing to do with the important measures of its performance such as gain and pattern. The best test instrument is a low power transmitter and field strength meter, one at each end of a simulated communication link. For the other end of the link, it would be best to use a setup typical of what you'll actually be using in the field. You'll be able to get some idea of the antenna's effectiveness with over-ground tests, but the ultimate test will be the strength of the signal received over water with the antenna mounted as it will be for the real application. Precise quantitative measurement isn't trivial at all, but qualitative relative measurements are fairly easily made. Roy Lewallen, W7EL |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
On Topic | Shortwave | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna | |||
Outdoor Antenna and lack of intermod | Scanner | |||
Outdoor Scanner antenna and eventually a reference to SW reception | Shortwave |