Home |
Search |
Today's Posts |
#1
|
|||
|
|||
ladderline to coax adapter
Got a Radio Works choke balun I'd like to use for feeding ladderline out of
an unbalanced tuner. The balun has coax fittings on each end. Ladderline doesn't adapt well to coax interfaces. What's the best way to put ladderline to my balun coax fitting? I can kluge a PL-259 plug onto the ladderline. I guess I could also stick one side of the ladderline in the center hole of the chassis coac fitting, and clamp the other side to the threaded part of the chassis fitting. Ideas solicited. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Coax Connectors & Adapters | Swap | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Shortwave |