I suggest you look at a BNC cable assembly available From AAA RF Products of
San Clemente, CA The AAA1003-180 Cable Assembly uses RG213/U cable with BNC
male connectors, lenght is 15 feet and loss at 900 MHz would be about 1.6
dB. Cost about $30. See www.aaarfproducts.com for email & phone #

Murray, W6KRC




"Cecil Moore" wrote in message
om...
Jim wrote:
thanks guys for your input! ok, forget about thin and supple. i need 50
ohm impedance coax at 900mhz into a uniden scanner(bnc connector) with a
15 foot run. what coax of any size is commonly available that would be
suitable?

LMR-1700 looks pretty good on the loss charts. It's about
$10 per foot, 1.67 inch diameter - not sure about the BNC
connector :-)
--
73, Cecil http://www.qsl.net/w5dxp