MRW wrote:
Hi all,

Happy Thanksgiving!

I am looking at the TDA1083 IC. The datasheet shows the following
image:
http://img120.imageshack.us/img120/2...diagram1sr.jpg

I'm trying to figure out where the input for the FM signal goes. This
IC is supposed to be an AM/FM receiver, but this newbie is a bit
clueless as to where the FM antenna and matching network should be
connected.

Any tips?

I figured there are many veterans here who have messed around with
radio ICs, so I'm trying my luck here.

Thanks!

If you can find a data sheet there should be a sample circuit, or a test
circuit. These can be invaluable for showing what the designers were
thinking.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com