| Home |
| Search |
| Today's Posts |
|
#11
|
|||
|
|||
|
65.75 is the magic frequency. It does appear the WFM mode can not be used on
this frequency on the 706 MKIIG I have. In the FM position, while distorted it is copyable. The radio shows WFM mode, but it certainly isn't in the wide mode. Now I have to get in the circuitry and see why the WFM is not operable on this band. "Cecil Moore" wrote in message et... Fred W4JLE wrote: You can if you tune to the audio offset. I have run the IC-706 all up and down the channel 3 60-66 MHz frequencies while in College Station, TX and cannot hear the audio anywhere. -- 73, Cecil http://www.qsl.net/w5dxp |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Traveling Waves, Power Waves,..., Any Waves,... | Antenna | |||
| Calculus not needed (was: Reflection Coefficient Smoke Clears a Bit) | Antenna | |||
| Smith Chart Quiz | Antenna | |||
| A Subtle Detail of Reflection Coefficients (but important to know) | Antenna | |||
| Length of Coax Affecting Incident Power to Meter? | Antenna | |||