Device insertion loss

December 20th 05, 06:18 PM posted to rec.radio.amateur.antenna

Ron J

Posts: n/a

Device insertion loss

Hello,

I was curious. If a matching network was designed to make the SWR at a
band of frequency less than 1.4 to 1, then what would happen if I
inserted a power sensor on the line with a rated SWR of 1.05 to 1 at
this frequency band?

Would that make my overall system SWR 1.4 + .05 = 1.45 to 1?

Thanks!

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Inverted ground plane antenna: compared with normal GP and low dipole.	Serge Stroobandt, ON4BAA	Antenna	8	February 24th 11 10:22 PM
Modeling TL "dielectric" loss	Owen	Antenna	6	July 2nd 05 12:56 AM
FCC: Broadband Power Line Systems	Paul	Policy	0	January 10th 05 05:41 PM
QST Article: An Easy to Build, Dual-Band Collinear Antenna	Serge Stroobandt, ON4BAA	Antenna	12	October 16th 03 07:44 PM
The two sorts of loss	Reg Edwards	Antenna	10	August 21st 03 07:41 PM

All times are GMT +1. The time now is 07:55 PM.

Menu

About Us