Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Scaling of Yagi design
Thanks Tom.
The smallest aluminum I have is 12mm square for the boom and 6mm round for elements. I would like to stick with the aluminum rod as I think this will be easier to secure than welding rod etc. Tom Ring wrote: David wrote: The elements are mounted approximately 3mm off the boom by nylon insulator blocks on the original design. The scaled design will use same construction. http://www.qsl.net/dk7zb/start1.htm Ok, I'll try to run a scaled version for you in the next one or two days. tom K0TAR |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Changing design frequency of K2RIW 432 MHz yagi | Antenna | |||
Call for a *practical* design for a 5 or 6 element wideband yagi using a hertz dipole as DE | Antenna | |||
Scaling yagi antennas | Antenna | |||
Lightweight yagi antennas as a design philosphy | Antenna | |||
Compact Yagi Design for VHF????????????????????????? | Antenna |