Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
That's certainly not true at my QTH. The vertical has two
extra S-units of noise on receive compared to my dipole. I'm assuming the two extra S-units of noise on receive won't affect my transmitted signal. When I had my 40m vertical up, I never heard any signal that was better received on the vertical. +12 dB of noise is virtually impossible to overcome in actual practice. If you get two extra units of noise, but the signal comes up four.... Well, you get it... I didn't get much extra noise going vertical at this location. The stronger signals always overrode it. The noise should be a non issue in most cases. But this also leads to an important question. Do you actually work long haul paths? If you don't , you probably won't see much advantage to a vertical. If you listened to long haul dx paths, and the vertical never beat the dipole, you didn't have a very good vertical. Actually, I've already pondered on that in the past. Yours was pretty low, with not many radials the last time around. The combo of mediocre antenna, and not using it for long paths is why yours was never better than the dipole. If I remember right, you weren't even talking over 1000 miles most times. But almost all my GP's had the radials attached to the mounting plate, which in turn was mounted to the mast. Conductive mast? Sure. Grounded at the base too. MK |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Inverted ground plane antenna: compared with normal GP and low dipole. | Antenna | |||
The Long and Thin Vertical Loop Antenna. [ The Non-Resonance Vertical with a Difference ] | Shortwave | |||
Tower Resonance Breaker? | Antenna | |||
Rohn tower as vertical | Antenna | |||
QST Article: An Easy to Build, Dual-Band Collinear Antenna | Antenna |