| Home |
| Search |
| Today's Posts |
|
#3
February 17th 06, 09:16 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
using coax shield to create a loading coil ?
The braided shield will be substantially lossier than a solid wire or
tube of the same diameter. Why? And the relatively poor quality dielectric used for the outside of the cable will also reduce the Q somewhat. The sheath is easy to strip. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Info - Icom IC-R75 with Kiwa Mods and Antenna Supermarket Eavesdropper SWL Sloper | Shortwave | |||
| Loading Coil Q | Antenna | |||
| Current in loading coil, EZNEC - helix | Antenna | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
Threaded Mode
