Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
On Sun, 05 Mar 2006 19:29:12 -0500, Mike Coslo
wrote: Based on another thread a few weeks back in which Horizontal dipoles were being compared to Vertical antennas, and from a little chiding from Roy, W7EL, I decided to do some testing on my own personal versions of the two. Mike, this sounds interesting. My setup is: Icom IC-761 Antenna 1 - Homebrew OCF dipole at ~ 50 feet. Antenna 2 - Butternut HF6V -ground mounted and 18 radials on the ground. Question, does the magnitude of feedline radiation from the OCF (presumably predominantly vertical) significantly affect qualification of it as a horizontal antenna? Another, are the antennas coupled significantly, eg is one within the near field zone of the other? It is pretty hard to avoid in a residential block on the low bands, and it will confuse the results somewhat. Part one of this experiment is to calibrate the S-meter. I found that trying to calibrate the thing with on-air signals was a nuisance, and probably wouldn't be as accurate, so I used a signal generator. I started out with a +20 signal, then worked my way down. +20 start S9 -18 db S8 -23 db S7 -26 db S6 -29 db S5 -32 db S4 -35 db S3 -37 db S2 -39 db S1 -41 db Not only is the shape of the scale an issue, but the granularity or resolution, especially with LCD meters, or any meter where there are discrete steps in the meter current (such as where a D/A converter drives the meter movement). If you want to move beyond S meters, you could try FSM (www.vk1od.net/fsm) and organise some constant carriers at known distances / radiation angles that you could make a series of measurements of and produce summary statistics (median and inter quartile range) for each antenna type. All in all, I would have to say that the meter tracks very well from S8 to S4, and the only place that wasn't that great was from S9 to S8. But considering the transient nature of the signals we are receiving, I would have to day that the S-meter is of reasonably close accuracy. With my newly calibrated S-meter I am ready to start looking at what the two different antennas are doing for me. I have a coaxial switch to jump back and forth between the two. My initial impressions are that there are some surprises. The difference in noise levels varies by antenna by band. On some bands the vertical is noisier, and on others it is the OCF dipole. Especially intriguing is that on PSK mode, where I can see several signals at one time, switching between antennas will attenuate some signals, while other signals increase in strength. I think that my vertical works better than I gave it credit for, but If I definitely want *both* antennas. I described a technique for assessing the relative performance of mobile stations by having them transmit known constant carrier, each station space about 200Hz and turning circles in a carpark near each other, and to observe them at typical propagation distances with an audio spectrum analyser, watching the relative strength of the carriers. Your PSK setup is affording you the same type of comparison, and provides a ready (and recordable) assessment of the relative strength of the stations under the two antenna scenarios. Be great if you could orchestrate stations at known distances as part of an organised test. Owen Next installment will be the band to band comparison of the two antennas with some numbers. Installment three will be an investigation of that PSK signal strength business. - 73 de Mike KB3EIA - -- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Question is 'it' a Longwire {Random Wire} Antenna -or- Inverted "L" Antenna ? | Shortwave | |||
Response to "21st Century" Part One (Code Test) | Policy | |||
Response to "21st Century" Part Two (Communicator License) | Policy | |||
Poor vertical performance on metal sheet roof - comments? | Antenna | |||
efficiency of horizontal vs vertical antennas | Antenna |