On Mon, 13 Mar 2006 18:59:34 -0500, "Robert11"
wrote:

Hello:

Is it safe to use the typical GE RTV silicones against a Polyethylene (PE)
coax outer jacket ?

I know the RTV's use some type of acid (acetic ?) to cure the stuff, and I
was wondering if
anyone might have any first hand experience if there is any kind of
interaction with a coax outer jacket ?

Thanks,
Bob

Although Bob isn't asking about sealing connectors, this thread has
drifted that way.

If this is indeed his need, then I offer my method. I use
Plymouth-Bishop No. 122 rubber tape followed by an overwrap of a good
quality vinyl tape.

http://www.plymouthbishop.com/

If memory serves, I bought the 122 at Home Depot, although their web
site doesn't show that they carry it anymore. An electrical supply
house would likely be a source.

Scotch® Self-Fusing Silicone Rubber Electrical Tape 70
1 in x 30 ft

This is a high-temperature, arc-and track-resistant tape composed of
self-fusing, inorganic silicone rubber with an easy-tear and easy-strip liner.
Packed 1 per box, 10 per carton with 50 per case.

In article ,
Wes Stewart wrote:

If this is indeed his need, then I offer my method. I use
Plymouth-Bishop No. 122 rubber tape followed by an overwrap of a good
quality vinyl tape.

http://www.plymouthbishop.com/

If memory serves, I bought the 122 at Home Depot, although their web
site doesn't show that they carry it anymore. An electrical supply
house would likely be a source.

My local Home Depot had it in stock as of last week... I bought a
couple of rolls, and they had plenty more.

Their web site seems to show only a fraction of what they have in the
stores.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!