| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
Yuri, K3BU quoted K4IA:
"According to ON4UN-linear loading can be made virtually loss free (pg 9-39)." ON4UN does say that but the page is different in my copy of "Low-Band DXing". Mine is the 2nd edition. On page 9-39 are SWR curves versus frequency for the vertical top-hat loaded antenna on page 9-37. Perhaps a better idea of "linear loading" may be seen in Fig 9-27 on page 9-19 of edition no.2. The subscript reads: "Since no coils are used in this form of loading (a zig-zag in the radiator length), linear loading cam be used with almost no loss." Best regards, Richard Harrison, KB5WZI |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Re-Normalizing the Smith Chart (Changing the SWR into the same load) | Antenna | |||
| Load matching puzzle | Antenna | |||