Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
On Sun, 2 Apr 2006 22:54:10 -0400, "Yuri Blanarovich"
wrote: So how many electrical degrees has the quarter wave resonant radiator that is loaded with loading coil (or stub) about 2/3 way up and is say 30 deg. physical "length" to make it resonant? Hi Yuri, This is thin ice. If you are treading along the 1:1 replacement of coil (wire-length/phase/Vf/whatever) for missing radiator length; then Cecil is prepared to prove it to within ±59% error. We could call it Cecil's 1.59:0.41 replacement rule - guaranteed to prove just about anything, and to whiten your teeth. 73's Richard Clark, KB7QHC |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Questions -?- Considering a 'small' Shortwave Listener's (SWLs) Antenna | Shortwave | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Swap | |||
Current in loading coil, EZNEC - helix | Antenna |