Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Yuri Blanarovich wrote:
Check my article that describes the controversy, shows some proof of reality and then efforts of the "gurus" to deny it and "reason" why it can't be so. http://www.k3bu.us/loadingcoils.htm The problem is that back in 1953 in QST article there was erroneous conclusion/statement made, which propagated through the books, until W9UCW measured the current across the loading coils and found that there is significant drop from one end to the other, and the rest is (ongoing) history Hmm, certainly it would seem to make sense that: The current in a typical loading coil in the shortened antennas drops across the coil roughly corresponding to the segment of the radiator it replaces. Quote from your page. I would not expect anything else. If the loading coil is making the antenna act like a physically longer antenna, other "qualities" of that simulation are likely to be similar. Is there a reason why the coil would *not* do this? - 73 de Mike KB3EIA - |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Imax ground plane question | CB | |||
Questions -?- Considering a 'small' Shortwave Listener's (SWLs) Antenna | Shortwave | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Scanner | |||
FS: sma-to-bnc custom fit rubber covered antenna adapter | Swap | |||
Current in loading coil, EZNEC - helix | Antenna |