Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
On Wed, 17 Dec 2003 20:58:51 GMT, "Roger Gt"
wrote: "Mike Sims" wrote in message t... In article , says... Buy a tower? 'Doc I'd love to, but I need to keep my cost under $250, and I don't know where to buy them. I live in Hesperia, CA. Home Depot: Chain link rails are 21 feet long, three with standard separator clamps will make a 63 foot length. Set four feet into a cement anchor, guy well! Works for me! I went to a place that installs the fence and actually found the pipe cheaper, BUT YMMV. The nice thing about the steel tubing used for the fence is it is quite a bit stronger than steel pipe. It won't bend (take a set) as easily as galvanized water pipe, but OTOH it is more flexible (springy) You can also go to a steel supplier (we have several locally) and may find even better prices. Notice I said *may*. I purchased two lengths of 1 1/4 and one length of 2" (both with 1/4 inch wall) at very reasonable prices. As to strength? It's what's holding all the antennas. http://www.rogerhalstead.com/ham_files/Tower29.htm The top arrays being 30 feet above the top of the tower. However I do have to admit, when the wind gets close to 70 MPH it looks like a bluegill rod that just tied into a monster Bass. Roger Halstead (K8RI & ARRL life member) (N833R, S# CD-2 Worlds oldest Debonair?) www.rogerhalstead.com Return address modified due to dumb virus checkers Cost? about $150 plus guys! |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Anyone have a secret to finding that Free tower. | Antenna | |||
160 Inverted L and tall tower | Antenna | |||
Tower installation | Antenna | |||
EZ Way tower sheared hinge pin conclusion(?) | Antenna | |||
EZ Way tower sheared hinge pin | Antenna |