Home |
Search |
Today's Posts |
#2
![]() |
|||
|
|||
![]()
This will not answer your question but it is amusing. This guy claims
his SS replacement top section for fiberglass antennas gives you 2dB gain and a lot of other BS. See: http://cgi.ebay.com/BASE-ANTENNA-UPG...QQcmdZViewItem “PRINCIPLE EXPLANATION... THIS UNIT IS A STAINLESS STEEL TOP SECTION THAT SCREWS INTO THE TOP SECTION OF YOUR EXISTING FIBERGLASS BASE ANTENNA, AND IT IS A PROVEN FACT STEEL ANTENNAS OUT PREFORM FIBERGLASS IT ALSO HAS A METAL HELIX COIL TO INCREASE RECIEVE .. THIS UNIT HAS A LOAD IN IT VERSES YOUR TOP SECTION THAT DOESNT HAVE A LOAD THIS INCREASES TRANSMIT POWER BY DRAWING POWER TO THE TOP LOAD....” Ooh, don’t question him, he’s a broadcast engineer! Ha! Bob Myles Byrne wrote: Been looking for a used 2 mtr ant. - was reading some comments about Fiber Glass and Lightning - Someone said "Fiber Glass to lightning is like a trailer park to a tornado" - "It's all metal on the inside" - So, is there something to the comment ? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Antennas, metal objects and HF reception | Shortwave | |||
Using a metal roof as a ground plane | Antenna | |||
12SQ7 glass versus metal, any difference for Hallicrafters Continentalshorwave radio? | Shortwave | |||
Loop antenna question | Shortwave | |||
'Gluing' a broken glass antenna insulator. | Antenna |