Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Yuri Blanarovich wrote:
IT IS STANDING WAVE CURRENT and VOLTAGE along the resonator, get it? What's next? Denying that there is a daylight, when the sun is out? The problem as I see it is that the lumped circuit folk have no way of knowing when their model has failed them and it is known to have a failure range. The only way I know of verifying their model's results is to compare it to the distributed network model results (or Maxwell's equations) to see if it agrees. That is something they have proven unwilling to do so they are really shooting in the dark. In particular, using a signal containing no phase information to try to measure the phase shift through a coil and then continuing to report it as a valid result is really strange. They apparently atill haven't realized that superposition doesn't preserve all of the information in the two original waves. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Current across the antenna loading coil - from scratch | Antenna | |||
Top Loading Butternut HF2V for 160m | Antenna | |||
Antenna Loading Coils | Antenna | |||
Loop antenna question | Shortwave | |||
Eznec modeling loading coils? | Antenna |