Home |
Search |
Today's Posts |
#10
![]() |
|||
|
|||
![]()
Yuri Blanarovich wrote:
standby for our tests, measurements and data. Yuri, I don't know what you are going to prove. W8JI's and W7EL's own measurements prove beyond any doubt that the current at each end of the coil is NOT equal. And the error they made in trying to measure phase using a signal with unchanging phase is more than obvious. What you are going to find is that the coil warps the current profile away from a pure cosine wave as is shown in Figure 3 at: http://www.k6mhe.com/n7ws/Loaded%20antennas.htm The delay through that coil is obviously NOT zero and the currents at the ends are obviously NOT equal. -- 73, Cecil http://www.qsl.net/w5dxp |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Current across the antenna loading coil - from scratch | Antenna | |||
Top Loading Butternut HF2V for 160m | Antenna | |||
Antenna Loading Coils | Antenna | |||
Loop antenna question | Shortwave | |||
Eznec modeling loading coils? | Antenna |