LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old April 25th 06, 04:00 PM posted to rec.radio.amateur.antenna
Tom Ring
 
Posts: n/a
Default Velocity Factor and resonant frequency

Dave wrote:

Tom Ring wrote:

Tom, the original question is a single conductor transmission line. A
single conductor transmission line is used to feed a 'classic Windom'.

In that configuration, is it a G line?

For the uninitiated, including this questioner, what is a G line?


I don't believe a single bare wire will operate as a transmission line
in free space. It will radiate. G line, on the other hand, will not.
At least it won't radiate any more than a piece of coax. And it can be
used in reasonably normal situations, but no sharp bends. It is not
practical for HF, however. 70 cm would probably be as low as you would
want to go.

The quick description is that G line is a wire coated with a dielectric
to a specific thickness that is coupled to by a device resembling a
feedhorn on each end, where the horn is a flaring of the shield. As I
remember it, the dielectric discontinuity constrains the E field, and
hence the EM field. The losses are much lower than coax, on the order
of 5 dB per mile at 500 MHz.

For details see -

http://coldwar-c4i.net/G-Line/EE0860/p638.html

tom
K0TAR
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 05:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017