"Yuri Blanarovich" wrote in message
...

There are other examples where shield "doesn't shield" - like link
coupling made of coax with end shield open and center conductor soldered
to the shield. As I mentioned I have magnetothermia machine that produces
about 200W from single shielded loop, according to Tom, it should be
frying the coax in the gap, with all that RF power trying to make the
corner :-)


Yuri, think about how the "link coupling" magnetic loop you describe
above works. When the loop is energized where does the RF current
leaving the center conductor go? It has to flow onto the outside of the
shield. Where else could it go?

RF current "makes the corner" around to the outside surface of the
shield in coax all the time. If it didn't we wouldn't need choke
balun's.

73, Mike
W4EF.............................................. ...................