| Home |
| Search |
| Today's Posts |
|
#1
May 26th 06, 10:41 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
Loose antenna base?
I am using screw-on antennas on my Ramsey DF rig.
The threaded (female) barrels keep coming loose in the antenna tube -- where they appear to be locked by a groove and four tiny punches in the tube. I have tried solder, but it does not adhere. Any other suggestions? Ken KC2JDY |
|
#2
May 27th 06, 04:37 AM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Loose antenna base?
Ken C wrote:
I am using screw-on antennas on my Ramsey DF rig. The threaded (female) barrels keep coming loose in the antenna tube -- where they appear to be locked by a groove and four tiny punches in the tube. I have tried solder, but it does not adhere. Any other suggestions? Ken KC2JDY red loctite http://www.loctite.com/int_henkel/loctite_us/index.cfm |
|
#3
May 27th 06, 11:34 PM
posted to rec.radio.amateur.antenna
|
|||
|
|||
|
Loose antenna base?
On Fri, 26 May 2006 23:37:42 -0400, "TimPerry"
wrote: red loctite I don't think so. It is not conductive. Maybe conductive epoxy would work, tho. This would not be going on the threads. Rather, it has to bond the [unthreaded] outside of female threaded collar to the antenna tubing. Ken KC2JDY |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
