LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #4   Report Post  
Old December 26th 03, 07:47 PM
Richard Clark
 
Posts: n/a
Default

On Fri, 26 Dec 2003 18:44:05 GMT, Dave J. wrote:

The rails of my rack look like their about 2 meters long or real close
but there's bars going perpendicular to the rails too to add more
metal. There's not a lot of choices for antenna mounting on the RV but
the rack seems perfect for the truck-mirror or marine-rail type of
antenna mounts. If I don't use the rack then I need some type of
antenna that doesn't need a ground plane, right? Don't know much about
what's available that doesn't need a ground plane.

Dave


Hi Dave,

You have more than enough metal to do the job. You will not find a
better situation unless you wrap the RV in aluminum foil (to add about
0.1 dB gain); but then you would run into things because of the
blocked windshield.

73's
Richard Clark, KB7QHC
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Poor vertical performance on metal sheet roof - comments? Kristinn Andersen Antenna 23 August 8th 03 11:08 PM
Beam question - roof mounted?? GS Antenna 3 July 12th 03 07:53 AM


All times are GMT +1. The time now is 08:37 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017