| Home |
| Search |
| Today's Posts |
|
#1
June 18th 06, 03:20 PM
posted to sci.electronics.design,rec.radio.amateur.misc,rec.radio.amateur.antenna
|
|||
|
|||
900MHz Cable Feeds
Joe G (Home) wrote: Hi All, I have a 900MHz radio system and I want extend 50ohm coax cable from 3m to 20metres. (well.... I mean - replace the 3m with a complete 20metre section with proper termination coax connectors etc) What losses and reflections should I watch out for? The obvious question is: how much loss can you *stand* in this application? (X-posted to more appropriate groups) |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Question about auto antenna cable and connectors | Homebrew | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Antenna | |||
| The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} | Shortwave | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
| Poor quality low + High TV channels? How much dB in Preamp? | Shortwave | |||
Threaded Mode
