About Us

Cecil Moore · July 13th 06, 04:13 AM posted to rec.radio.amateur.antenna

wrote:
Cecil Moore wrote:
The half-wave end-fed antenna starts at point X. The feedline is
at point B. Here's what you said:

wrote:
1.) You have a half-wave end-fed antenna. There has to be as much
common mode current leaving the end of that point and flowing down the
feedline as there is flowing out onto the antenna at that point. There
isn't any exception to this rule.

The STUB is a balanced transmission line. If you quoted the entire post
everyone would see what I meant.

That is a complete quote of your item number 1. What you said is
self explanatory. You said the current flowing onto the antenna
is equal to the current flowing down the feedline. You were wrong.
--
73, Cecil http://www.qsl.net/w5dxp

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Feeding 2 VHF Yagis from one coax?	Scott	Antenna	2	April 9th 06 04:30 AM
db Question	Robert11	Antenna	13	February 14th 06 05:55 AM
FCC: Broadband Power Line Systems	Paul	Policy	0	January 10th 05 05:41 PM
physical/intuitive understanding of RL/RC time constants?	Alan Horowitz	Antenna	21	October 15th 04 06:33 AM
Yagi, OWA and Wideband Yagi etc etc	Richard	Antenna	4	June 14th 04 01:48 PM