LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #22   Report Post  
Old July 12th 06, 03:23 PM posted to rec.radio.amateur.antenna
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 1,614
Default Induced signal?

wrote:
In your alleged system, you carried RF through the coax and used the
coax as a swixcthing stub.


You seem to be confused by my actual system in my yard
Vs the hypothetical piece of coax I introduced as a
simplified example for discussion purposes.

Forget the coax example. In my yard, I have run two wires
up a piece of 1/4WL aluminum tubing to a relay which
switched a top hat in and out just as the other fellow
wanted to switch a wire in and out. The only thing that
I would have to add to turn that system into switchable
half-squares, like the other fellow has, would be two
3/4WL runs of wire. I suspect the SGC-230 autotuner at
the base would match the new feedpoint impedance just fine.
I've never seen an impedance it couldn't match.

In the other fellows system, he had a high impedance feed and had to
get a relay conductor past the high impedance feed without affecting
the system.


The two physical configurations being discussed are *identical*,
being 1/4WL of tubing through which two DC wires are routed.

They are TOTALLY different.


Once again, you make an outrageous exclusive statement
completely divorced from reality. If any one thing about
the two antennas is not different, your statement is
completely false. One wonders what compels you to make
such strange assertions.
--
73, Cecil
http://www.qsl.net/w5dxp
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Grayland DXpedition Loggings - April 9-10, & Antenna Report John Plimmer Shortwave 0 April 13th 06 03:06 PM
OCSP DXpedition Loggings - Jan. 7 - 9 Guy Atkins Shortwave 2 January 18th 06 06:56 AM
More MW DX logs from NJ with the 7600gr Michael Shortwave 0 September 26th 04 05:52 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Shortwave 16 December 13th 03 03:01 PM


All times are GMT +1. The time now is 10:10 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017