Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 7th 04, 11:15 PM
Doug McDonald
 
Posts: n/a
Default

ComputerDoctor wrote:


As WFH said, its not so much a case of "weak signal" as too many reflected
signals.


Well, since Australia uses COFDM for digital TV, assuming that
station
is available in digital, just get a digital STB and you are in
business.

That's the Euro-DVB party line.

It's a lie. You still need signal!

That said, get a big Yagi as high as you can get, an
antenna mounted preamp, and see what you get analog. If it's
reasonably good S/N but somewhat ghosty, check up on their
digital and if they are on, go digital.

At least in the US digital TV is simply amazing ....
I'm getting reliable reception from a station with a path
loss of 183 dB (for a dipole receiving antenna of course),
using a big antenna and GaAsFet preamp.

Doug McDonald
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
domestic reception issues Bill Antenna 0 November 25th 03 02:32 AM
Ladder Line or Coax For Reception only? Walter Antenna 12 October 11th 03 03:16 AM
Reflection Coefficient Challenge Solved Richard Harrison Antenna 5 September 12th 03 08:25 PM
Reception in a tin can ElMalo Antenna 6 August 29th 03 04:49 PM


All times are GMT +1. The time now is 11:06 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017