ARRL Antenna Modeling Course
 

Anyone care to share their experience with ARRL's Antenna Modeling
Course? Is it worth it? Cost is about $160 for ARRL members (including
manual) and requires EZNEC...does it require the ARRL EZNEC or the
commercial version?
(I don't know.)

Thanks in advance for any comments.

John
AB8WH

ARRL Antenna Modeling Course
 

On Thu, 27 Jul 2006 14:44:47 -0400, jawod wrote:

Anyone care to share their experience with ARRL's Antenna Modeling
Course? Is it worth it? Cost is about $160 for ARRL members (including
manual) and requires EZNEC...does it require the ARRL EZNEC or the
commercial version?
(I don't know.)

Thanks in advance for any comments.

John
AB8WH

You can purchase the course book for around $40.00 USD from the ARRL.
Doing that you'll have a good reference book for future use at hand. The
book is the complete course word for word and very well written. Plus the
money you'll save will pay for EZNEC with a little pocket change left over.

Danny
K6MHE

ARRL Antenna Modeling Course
 

I took the course and purchased the EZNEC + v4.0.

For me it was the right way to go. Having the pressure and
responsibility of completing the course kept me on topic in a timely
fashion. I continue to use the reference material and the program.

The EZNEC program allows you to compare a lot of different conditions
without expending unnecessary resources.

John W8CCW

On Thu, 27 Jul 2006 14:44:47 -0400, jawod wrote:

Anyone care to share their experience with ARRL's Antenna Modeling
Course? Is it worth it? Cost is about $160 for ARRL members (including
manual) and requires EZNEC...does it require the ARRL EZNEC or the
commercial version?
(I don't know.)

Thanks in advance for any comments.

John
AB8WH
John Ferrell W8CCW