Menu

BC-453 H.V.

Search this Thread

#1

Report Post

Old

May 16th 07, 05:30 PM posted to rec.radio.amateur.boatanchors

Ken Fowler Ken Fowler is offline

Ken Fowler is offline

external usenet poster

First recorded activity by RadioBanter: Apr 2007

Posts: 23

Default

BC-453 H.V.

On 16-May-2007, (Scott Dorsey) wrote:

terryS wrote:

But I've also read that the variuos 'command' receivers (BC453, 454
etc,) will work well with much lower B+ voltages.
Which are much kinder on the 60 year old decoupling capacitors etc.
can't remember the value but could it have been as low as 120 volts
DC?
Cos it occurs to me that one could use a 150 volt gas regulator tube
(OD3?) on the output of a power supply to achieve that?

You might be able to do a shunt regulator, since the current demands are
small. Be more reliable to use a solid-state series regulator made with
a zener diode string and a TIP50 darlington. You could use an OD3 and a
6L6, though, I think.

But, since you're going to be running the things on AC house current
anyway rather than on the original dynamotors in most installations,
it would be easier just to use an inexpensive 120V isolation transformer
driving a bridge rectifier and a pi filter as your power supply. Cheaper
to build than a high voltage supply and you get 168V out of it minus the
loss in the filter choke.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Back in the 1950s, we ran the ARC-5 receivers on AC-DC transformerless power supplies from 115 VAC.
I think you had to change the filaments to series and use a 35w4 rectifier. Also had to be careful
to plug into the AC so that the Neutral connected to the chassis. The B+ would be about 155 VDC.
Not Safe!

Ken Fowler

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

All times are GMT +1. The time now is 12:54 AM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017