HP 209A power supply ?
 

Some how I lost the URL for the site for HP discontinued product
manuals. I just got a dead HP 209A and need to get it going. It appears
that one of diodes near Q2 has shorted and toasted 2 or 3 resistors in
the same row. Any tips or a scan of the ps board or a manual copy
appreciated.
tnx
--
73
Hank WD5JFR

HP 209A power supply ?
 

Henry Kolesnik wrote:

Some how I lost the URL for the site for HP discontinued product
manuals. I just got a dead HP 209A and need to get it going. It appears
that one of diodes near Q2 has shorted and toasted 2 or 3 resistors in
the same row. Any tips or a scan of the ps board or a manual copy
appreciated.
tnx
--
73
Hank WD5JFR


I don't see it in the 'manuals' section on Agilent's web site, or
BAMA web site.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

HP 209A power supply ?
 

"Henry Kolesnik" wrote in message
...
Some how I lost the URL for the site for HP discontinued product
manuals. I just got a dead HP 209A and need to get it going. It appears
that one of diodes near Q2 has shorted and toasted 2 or 3 resistors in
the same row. Any tips or a scan of the ps board or a manual copy appreciated.
tnx
--
73
Hank WD5JFR


The URL for the HP manual archive is http://www.hparchive.com/hp_equipment.htm,
but the 209A manual isn't there.
You can find it at:
http://www.manualserver.com/signal_g...or_manuals.htm
http://www.manualsplus.com/
https://www.ridgeequipment.com/store...php?query=209A

Take your pick

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra

HP 209A power supply ?
 

Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

--

73
Hank WD5JFR
"DaveM" wrote in message
. ..
"Henry Kolesnik" wrote in message
...
Some how I lost the URL for the site for HP discontinued product
manuals. I just got a dead HP 209A and need to get it going. It
appears
that one of diodes near Q2 has shorted and toasted 2 or 3 resistors
in
the same row. Any tips or a scan of the ps board or a manual copy
appreciated.
tnx
--
73
Hank WD5JFR


The URL for the HP manual archive is
http://www.hparchive.com/hp_equipment.htm, but the 209A manual isn't
there.
You can find it at:
http://www.manualserver.com/signal_g...or_manuals.htm
http://www.manualsplus.com/
https://www.ridgeequipment.com/store...php?query=209A

Take your pick

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate
characters in the address)

"In theory, there isn't any difference between theory and practice.
In practice, there is." - Yogi Berra

HP 209A power supply ?
 

Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

HP 209A power supply ?
 

Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing
as
I will exceed its what it's worth. . The case is very nice and not
beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something
should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

HP 209A power supply ?
 

Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing
as
I will exceed its what it's worth. . The case is very nice and not
beat
up, close to new so I believed it was a working unit. WRONG, but
I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something
should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to
be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

HP 209A power supply ?
 

That link does not seem to work.
Anyone else have any luck??

....Dave



"Henry Kolesnik" wrote in message
...
Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."

HP 209A power supply ?
 

"Dave Edwards" wrote in message
. ..
That link does not seem to work.
Anyone else have any luck??

...Dave



Worked for me.. You have to be a member of the Yahoo group to get in and
download files.
Cheers
--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra


"Henry Kolesnik" wrote in message
...
Manual posted on:
http://tech.groups.yahoo.com/group/h...uipment/files/

--

73
Hank WD5JFR
"Henry Kolesnik" wrote in message
...
Scott
Thanks, I finally got it.

--

73
Hank WD5JFR
"Scott Dorsey" wrote in message
...
Henry Kolesnik wrote:
Thanks for the leads but I don't want to spend anymore on this thing as
I will exceed its what it's worth. . The case is very nice and not beat
up, close to new so I believed it was a working unit. WRONG, but I've
been wrong before. I have a working 204C and schematic but the ps is
just enough different that I can't use it for repairs. Something should
show up sooner or later.

What do you need? There are only a couple possible power supply
configurations. If you draw out that section of the circuit, and
what the output voltage is, I'll tell you what the values ought to be.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."