"Lee K. Gleason" wrote in message
. ..
Just got around to trying to put a KWM-2A I bought a few years back on
the
air. It's in roughish condition, but seems complete and usable. After
replacing a failed diode in the power supply, it recieves fine.


Thanks all for the answers & suggestions. Two problems were found. One was
that the microphone had a broken wire in the cable. The other problem was
between the ears - this is the first SSB transceiver I've had (tells ya how
long I've been inactive), and I was expecting power to show on the output
meters just from keyng the mike (you know, from the carrier, which is
nonexistent). Transmits fine now.
--
Lee K. Gleason N5ZMR
Control-G Consultants