Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
Not Clorox bleach, Clorox Cleanup. It is a spray cleaner similar to 409.
If you use Clorox bleach on aluminum, it will etch it and eat it away. I worry about those type of cleaners leaving acid or base or solvent residues, funny smells. There have been radios I ran through the dishwasher and pulled it out after the rinse and dunked it in hot distilled water, followed by LP air and bake at 130 for a day. I used to refurb telephones that way too. Dishwasher is hell on decals though. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Restoration Help Needed in Davenport, Iowa area | Boatanchors | |||
TUBES NEEDED..for sx130 restoration..tube trade possible | Boatanchors | |||
National RCQ 2.7-6.4 RF Coil Needed | Boatanchors | |||
Dynamax CTR100 cart info needed, arcade restoration | Broadcasting |