|
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
A while back I bought a Radio Frequency Labs 459A Crystal Impedance
Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks -- 73 Hank WD5JFR |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
Henry Kolesnik wrote:
A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
In article , Ken wrote:
Henry Kolesnik wrote: A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ I'm not really sure you shouldn't be able to operate the thing without a manual... it should have a test oscillator inside, a meter, and a place where you put a crystal. Insert the crystal, then swing the oscillator back and forth until you read the resonance point on the meter. Some models out there required an external oscillator. See if you can get a manual for an AN/TSM-15. That should give you at least the basic principles of operation for the things. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
"Ken" wrote in message ...
Henry Kolesnik wrote: A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ http://www.cooke-int.com/manuals/R.htm has an original copy the manual. Looks like they're having a half price sale going on... -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) Life is like a roll of toilet paper; the closer it gets to the end, the faster it goes. |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
Dave
Thanks for the tip on Cooke in England, I've asked them for a delivered price. -- 73 Hank WD5JFR "DaveM" wrote in message . .. "Ken" wrote in message ... Henry Kolesnik wrote: A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ http://www.cooke-int.com/manuals/R.htm has an original copy the manual. Looks like they're having a half price sale going on... -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) Life is like a roll of toilet paper; the closer it gets to the end, the faster it goes. |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
The Brits have gone home and with no response I'm still looking for
paper work. "Henry Kolesnik" wrote in message ... Dave Thanks for the tip on Cooke in England, I've asked them for a delivered price. -- 73 Hank WD5JFR "DaveM" wrote in message . .. "Ken" wrote in message ... Henry Kolesnik wrote: A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ http://www.cooke-int.com/manuals/R.htm has an original copy the manual. Looks like they're having a half price sale going on... -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) Life is like a roll of toilet paper; the closer it gets to the end, the faster it goes. |
Crystal Impedance Meter TS-330/TSM RFL 459A need manual
Cooke in England finally responded and stated that they sold all their
manuals to Manualsplus over here. So I'm trying them. "Henry Kolesnik" wrote in message ... The Brits have gone home and with no response I'm still looking for paper work. "Henry Kolesnik" wrote in message ... Dave Thanks for the tip on Cooke in England, I've asked them for a delivered price. -- 73 Hank WD5JFR "DaveM" wrote in message . .. "Ken" wrote in message ... Henry Kolesnik wrote: A while back I bought a Radio Frequency Labs 459A Crystal Impedance Meter with a range of 0.8 to 15 MC. I think the military version is TS-330/TSM. I really want to try this thing out but need a manual or instructions, and a schematic if it isn't working. I've already got too much into it to spend another $30.00 for a commercial manual. I've Googled for free manual and can find nothing. Anyone have a PDF or a manual they want to sell cheap? Thanks If you have a lot in it, all the more reason to spend more on a manual. Try: http://www.agtannenbaum.com/ http://www.cooke-int.com/manuals/R.htm has an original copy the manual. Looks like they're having a half price sale going on... -- Dave M MasonDG44 at comcast dot net (Just substitute the appropriate characters in the address) Life is like a roll of toilet paper; the closer it gets to the end, the faster it goes. |
| All times are GMT +1. The time now is 06:55 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
RadioBanter.com