Help I spun a coil in a PACE (Pathcom) CB-76 Tranceiver (receives fine no
transmit)
Darn got the receive working then lost the transmit oscillator or mixer
(dried up paper coil)---- I barley put any torque on it.

Need a copy of the XTAL synthesizer circuit to repair the coil, the windings
are intact. This radio appears in the Sams CB50.
The coil is an has 3 terminals im guessing
1-Winding one = 2 turns --to base of transistor
2-Common ?
3-Winding two = 30 turns -- to wiper on xtal selector
So far no good


TNX -Joe NOSPAM